HP Vectra XU 6/XXX HP Vectra XU6/150 PC - User’s Guide - Page 64

Slide the drive into the shelf.

Get HP Vectra XU 6/XXX PDF manuals and user guides View all HP Vectra XU 6/XXX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Remove; the drive tray if installing a 5.25-inch drive Secure the drive in position Slide the drive into position Mounting Rails 5 Slide the drive into the shelf. 6 Secure the drive in position using the screws provided with the drive. 7 Locate the appropriate data cable for the device Flexible Disk Drive Cable SCSI devices can be connected to any free connector on the SCSI cable IDE CD-ROM drives should be connected to the Secondary IDE Channel cable (this cable is connected to the red connector on the system board) NOTE The IDE data cables are supplied separately in a bag with your PC 8 Connect the data and power cables to the rear of the device. (The connectors are shaped to go in one way only.)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Remove; the
drive tray if
installing a
5.25-inch drive
Slide the drive into position
Mounting Rails
Secure the drive
in position
5
Slide the drive into the shelf.
6
Secure the drive in position using the screws provided with the drive.
7
Locate the appropriate data cable for the device
IDE CD-ROM drives
should be connected
to the Secondary IDE
Channel cable (this
cable is connected to
the red connector on
the system board)
NOTE
The IDE data cables
are supplied
separately in a bag
with your PC
Flexible Disk
Drive Cable
SCSI devices can
be connected to
any free connector
on the SCSI cable
8
Connect the data and power cables to the rear of the device. (The connectors are shaped
to go in one way only.)