HP Vectra XU 6/XXX HP Vectra XU6/150 PC - User’s Guide - Page 86
Configuring the SCSI Interface, Integrated Interface, Disabled, Ultra SCSI, Automatic, Flexible Disk
View all HP Vectra XU 6/XXX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
If no devices are installed on the second IDE channel, you should highlight Secondary Integrated Channel and select Disabled. This will make more system resources available for other system components. IDE Primary Channel Device 1 840 MB Device 2 None or SCSI Data Transfer Speed Optimized Translation Method Standard CHS/Ext. CHS/Auto Primary Integrated Channel . . . Enabled/Disabled IDE Secondary Channel Device 1 CD-ROM Device 2 None or SCSI Data Transfer Speed Optimized Translation Method Standard CHS/Ext. CHS/Auto Secondary Integrated Channel . . Enabled/Disabled Configuring the SCSI Interface If you install a SCSI host adapter board, highlight the Integrated Interface option and select Disabled. Integrated SCSI Interface Integrated Interface Enabled/Disabled SCSI BIOS Not Available/Enabled Ultra SCSI Automatic/Enabled/Disabled Do not change the Ultra SCSI option from Automatic unless you are familiar with the restrictions of Ultra SCSI. To access advanced SCSI device configuration options, restart the computer and press [F7] when is displayed. Flexible Disk Drives If you install a flexible disk drive that uses the integrated disk interface, the Setup program should detect and configure the drive automatically. If you have two flexible disk drives, highlight Bootable Drive and select Drive 1 or Drive 2. This is the drive your computer will use to start (boot) from a system diskette. Flexible Disk Drives Drive 1 3.5-inch, 1.44 MB Drive 2 None Bootable Drive Drive 1 Interface Integrated/Controller Board If you install a flexible disk drive that has its own controller board, highlight the Interface option and select Controller Board. Configure the controller as described in its manual.