HP Vectra XU 6/XXX HP Vectra XU6/150 PC - User’s Guide - Page 9
Connecting To A Network
View all HP Vectra XU 6/XXX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Mouse Connector Keyboard Connector Display Connector CONNECTING TO A NETWORK The LAN Adapter installed in your PC may have two RJ-45 connectors (one for 100-Mbit/s operation and one for 10-Mbit/s operation) or one RJ-45 connector (supporting both 100-Mbit/s and 10-Mbit/s). The LAN Adapter can automatically detect which connector or network type is being used. 1 Connect the RJ-45 plug on your network cable to the 100-Mbit/s or 10-Mbit/s LAN connector on the LAN Adapter as appropriate for your network type. Push the plug into the connector until the plug clicks into place. 100-Mbit/s Connect the network cable to the 100-Mbit/s or 10-Mbit/s LAN connector (Your LAN adapter may have one connector which supports both network types.) 10 Mbit/s 2 Attach the other end of the LAN cable to a hub (or into a wall jack that is connected to a hub).