HP Workstation i2000 hp workstation i2000 owner's guide (a6037-90003) - Page 70
Select the Standard Error Device, 15.9 Booting from a Network
View all HP Workstation i2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
hp workstation i2000 owner's guide 3.15.8 Select the Standard Error Device Choosing the Select the Standard Error Device option on the main menu allows you to select the device where errors are reported. Use your arrow keys to select your preferred device and press Enter to activate the option. Save your settings before exiting. Refer to Figure 36. Figure 35. Select Active Standard Error Devices 3.15.9 Booting from a Network To boot from a network use the following steps. 1. From the EFI Boot Manager Main Menu select Add a Boot Option. 2. Select the following option: Removable Media [Acpi(PNPA03,0)/Pci(4¦0)/Mac(00XXXXXXXXXX)] / NOTE The MAC address may vary with each board. 3. Enter a file description at the prompt (e.g., LAN or Network) and press Enter. 4. Save your settings. 5. Exit both the Add a Boot Option screen and the Boot Manager Main Menu screen. 6. The EFI Boot Manager screen reflects your network boot option. Select this option and press Enter to boot from the network. 70