HP Workstation i2000 hp workstation i2000 owner's guide (a6037-90003) - Page 82
There are four- 4
View all HP Workstation i2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
hp workstation i2000 owner's guide 2. Carefully place the system on its side. The side containing the lock in the center should be facing upwards. 3. Pull the system out from the work area and grasp the bottom inside of the bezel. Locate the two- (2) bezel clips (as show in Figure 39) near the bottom of the system and press in to disengage the bezel from the chassis sheet metal. Once disengaged, gently pull the front bezel away from the system. There are four- (4) interlock clips that disengage from the slots within the system chassis. Bezel Interlock Clips Figure 38. Bezel Interlock Clips 4. Remove the side cover by firmly pressing on the center of the panel and pushing, forcing the panel to slide backwards toward the rear of the unit. 82
hp workstation i2000 owner’s guide
82
2.
Carefully place the system on its side.
The side containing the lock in the center
should be facing upwards.
3.
Pull the system out from the work area and grasp the bottom inside of the bezel.
Locate the two- (2) bezel clips (as show in Figure 39) near the bottom of the
system and press in to disengage the bezel from the chassis sheet metal.
Once
disengaged, gently pull the front bezel away from the system.
There are four- (4)
interlock clips that disengage from the slots within the system chassis.
Figure 38. Bezel Interlock Clips
4.
Remove the side cover by firmly pressing on the center of the panel and pushing,
forcing the panel to slide backwards toward the rear of the unit.
Bezel Interlock Clips