IBM 4500R Hardware Maintenance Manual - Page 68
Installing the server cover and bezel, Connecting external options, Cabling requirements
UPC - 087944567837
View all IBM 4500R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Installing the server cover and bezel 1 Cover 2 Cover-release latch 3 Flanges To install the server cover: 1. Place the cover-release latch in the open (up) position and align the flanges on the left and right sides of the cover with the slots on the server chassis. 2. Close the cover-release latch. To install the bezel: 1. Align the trim bezel with the front of the server. 2. Press inward on the top sides of the bezel and press the bezel toward the server until it clicks into place. To complete the installation: If you disconnected any cables from the back of the server, reconnect the cables; then, plug the power cords into properly grounded electrical outlets. Connecting external options If you install a SCSI adapter, you can attach a SCSI storage expansion enclosure to your server. Cabling requirements To select and order the correct cables for use with external devices, contact your IBM reseller or IBM marketing representative. For information about the maximum length of SCSI cable between the terminated ends of the cable, see ANSI SCSI Standards: • X3.131-1986 (SCSI) • X3.131-1994 (SCSI-2) • X3T10/1071D Adhering to these standards ensures that your server operates properly. 60 Hardware Maintenance Manual: Netfinity 4500R Type 8656