IBM 86624RY Maintenance Manual - Page 101

Help want to physically remove a defunct drive from the system and install a good drive in its place. Change the SCSI Transfer Speed: This choice is available in the Information mode only. It appears when you select a SCSI Channel icon. You can select this choice to change the transfer speed from its default value of Optimal. When the transfer speed is set to Optimal, the ServeRAID adapter or controller determines the best transfer speed, based on the types of SCSI drives and storage enclosures in use. Choices available are Ultra2 SCSI, UltraSCSI, Fast SCSI 2, and SCSI 2. Remove Defunct Drive: This choice appears in the Information mode only. After you physically remove a drive, select this choice to delete the drive information from the configuration. Replace Defunct Drive: This choice appears in the Information mode only. Select this choice to physically replace a defunct disk drive. Note Always replace a defunct drive with a drive of equal or greater capacity. Scan for New or Removed Ready Drives: This choice is available in the Information mode only. When you select this choice, the configuration program scans the individual channel or all channels on the ServeRAID controller for new or removed Ready drives. The following choices are available from the Help pull-down menu: Contents: Select this choice to access the online Help facility. This choice is available in both the Information and Configuration modes. Task-oriented Help is available from many of the pop-up windows that appear during the configuration process; and, you also can obtain context-sensitive Help by selecting an item and then pressing the F1 key. About: Select this choice to view the version number and copyright information for the ServeRAID Configuration Program. This choice is Netfinity 5500 M20 - Type 8662 93