IBM 86624RY Maintenance Manual - Page 268
the processor board., The cable connectors are
![]() |
UPC - 087944490654
View all IBM 86624RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
Note If you have not already done so, you might want loosen the four thumbscrews on the shuttle at the back of the server and pull the shuttle toward the back of the server to allow easier access to the cables. (See "Installing a 5.25-inch removable-media drive" on page 217 for an illustration of the shuttle and the thumbscrews.) The processor support tray should always be removed or replaced using the handles on the support tray cover. If the cover is not on the support tray, you must install it before removing or replacing the tray. 4. Disconnect the cables from the cable connectors on the processor board. (The cable connectors are located at the end of the processor support tray toward the front of the processor.) 5. Using the processor support tray handles 5 , carefully lift the processor support tray from the server. 6. Place the processor support tray in a safe place until you are ready to install it again. 260 Netfinity Server HMM
![](/manual_guide/products/ibm-86624ry-maintenance-manual-8d18aa9/268.png)