IBM 86624RY Maintenance Manual - Page 142

use the instructions in this section to install the Administration and Monitoring program. To install the ServeRAID WIN32-Based program: 1. Turn on the system and allow Windows NT or Windows 95 to start. 2. Insert the IBM ServeRAID Administration and Monitoring Diskette into the diskette drive. 3. Select Start, select Run; then, type the following: a:\setup Note The a represents the letter assignment for the diskette drive. 4. Press Enter; then, follow the instructions that appear on the screen to complete the installation. Refer to "Starting the ServeRAID Administration and Monitoring Program" on page 98 for more information about the WIN32-Based program. Installing ServeRAID device drivers This section provides the instructions for installing the device drivers for Windows NT, NetWare, OS/2, OpenServer, and UnixWare. The OS/2 and NetWare Administration and Monitoring Program files and background-server components install automatically when you use the instructions in this section to install the ServeRAID device drivers for OS/2 and NetWare. The Windows NT, UnixWare, and OpenServer background-server components install automatically when you use the instructions in this chapter to install the ServeRAID device drivers for Windows NT, UnixWare, and OpenServer. When using: Windows NT NetWare OS/2 OpenServer UnixWare Go to: "Installing ServerRAID device drivers for Windows NT" "Installing ServeRAID device drivers for NetWare" on page 136 "Installing ServerRAID device drivers for OS/2" on page 140 "Installing ServerRAID device drivers for OpenServer" on page 143 "Installing ServeRAID device drivers for UnixWare" on page 146 Installing ServerRAID device drivers for Windows NT: This section provides two sets of instructions for installing the ServeRAID device driver: one that you can use during the initial Windows NT installation and one that you can use if Windows NT already is installed. 134 Netfinity Server HMM