IBM 86624RY Maintenance Manual - Page 110

To reset the alarm, you can either select the STOP icon or select Reset Alarm on the General Options screen. Polling options: The ServeRAID adapter or controller will poll, or check, the server at a specified time interval for any changes that may have occurred in the server. You can choose how often the adapter or controller polls the server by specifying a time interval on the options menu, from five to 60 seconds. The default time interval setting is five seconds. The program will poll for the following events: Rebuild started Rebuild completed Synchronization started Synchronization completed Migration started Migration completed PFA error detected Dead drive detected Adapter or controller is not responding to commands Alert options: The Netfinity Manage alerts allow system administrators who are using the IBM Netfinity Manager Program to configure the ServeRAID Administration and Monitoring Program to notify the Netfinity Alert Manager of various activities occurring on the server. To configure the settings for the Netfinity Manager alerts: 1. Open the Options pull-down menu. 2. Select Alert Options. 3. Select Netfinity Alerts. A screen similar to the following appears. Note The default setting for the Netfinity Manager alerts is disabled. 102 Netfinity Server HMM