IBM 86624RY Maintenance Manual - Page 272
the slide-bracket to fit the mounting rail., slide bracket assembly and adjust the length
UPC - 087944490654
View all IBM 86624RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
3. Attach a slide-bracket assembly to the front of the rack: Notes 1. Get another person to help you attach the slide-bracket assemblies to the rack. 2. The slide-bracket assemblies can be installed on either the left or right side of the rack. 3. Refer to the illustrations for examples of the proper alignment of the slide-bracket assemblies. a. Position the slide-bracket assembly behind the mounting rail so that the slides will extend out from the front of the rack. b. If necessary, loosen the screws at the rear of the slide bracket assembly and adjust the length of the slide-bracket to fit the mounting rail. Tighten the screws. Screws c. Position a nut bar behind the slide-bracket assembly. d. Insert screws (6M by 16 mm) through the mounting rail, the slide-bracket assembly, and nut bars. Do not tighten the screws. 264 Netfinity Server HMM