IBM 86624RY Maintenance Manual - Page 71

Status LEDs The server has LEDs to help you identify problems with some server components (see, "Symptom-to-FRU index" on page 285). Status LEDs are located on the following components: Information LED panel For more information, see "Information LED panel" on page 205. Hard disk drive trays For more information, see "Controls and indicators" on page 181. Power supply For more information, see "Power supply LEDs" on page 251. Diagnostic panel For more information, see "Diagnostics panel LEDs" on page 187. Processor board See "Processor board component locations" on page 254 for locations of the LEDs on the processor board. Memory board See "Memory board component locations" on page 230 for locations of the LEDs on the memory board. Using the ServeRAID Advanced Configuration Functions The Advanced Functions choice allows you to initialize the configuration (reset the ServeRAID controller settings), import the configuration information from the drives, enable and disable the Boot CD-ROM and INT13 extensions, and view the controller and PCI information. When you select Advanced Functions from the Main Menu, a screen similar to the following appears. IBM ServeRAID Adapter Disk Array Mini-Configuration Ver. X.XX Advanced Functions Initialize Configuration Import Configuration from Drive(s) Configure BIOS Settings Adapter and PCI Information Exit Select a choice using the Up and Down Arrow keys, then press Enter. Netfinity 5500 M20 - Type 8662 63