IBM 86624RY Maintenance Manual - Page 107

4. Device Area Displays the state of each device connected to the physical channels of the ServeRAID adapter or controller, and if applicable, its array identifier. 5. Status Bar Displays help for the area where the cursor is currently pointing. Also displays the date and time. 6. Status Window Displays messages regarding the operational status of each adapter or controller. 7. Logical Drive Area Displays the number of logical drives created and the status of the logical drive. 8. Adapter Area Displays the number and status of the installed ServeRAID adapters and controllers To start the WIN32-Based Administration and Monitoring Program: 1. Do one of the following: Select the IBM ServeRAID Administration icon or Select IBM ServeRAID Administration from the Start menu. 2. The Administration and Monitoring Program starts in stand-alone mode. After this program loads, you can access the ServeRAID adapters and controllers. When the Main window appears: If you are running the program in the stand-alone mode and you have ServeRAID adapters or controllers installed in the system, the current settings of the installed adapters or controllers will appear on the screen. If you are running the program from a client with no ServeRAID adapters or controllers, a message will appear stating that no ServeRAID adapters or controllers are installed in the system. 3. To access the server that contains the ServeRAID adapters or controllers, select Network Settings from the Options menu. 4. When the window appears prompting for Stand-alone or Client/Server, select the Client/Server button. 5. In the edit box, type in the host name of the server that you want to access. or Select the host name from the pull-down list; then, select Connect. Note If security is enabled on the server, you must enter a valid user name and password. Netfinity 5500 M20 - Type 8662 99