IBM 86624RY Maintenance Manual - Page 64

Menu Selection Start Remote Video Data Available for Viewing Use Start Remote Video to enable the terminal program to remotely monitor and manage the server during POST. For more information, see "Using remote video mode to monitor and access POST" on page 58. When you are finished accessing the Netfinity Advanced System Management Processor using a terminal program, select Disconnect Current Logon from the main menu and then use the terminal program to close the connection to the Netfinity Advanced System Management Processor. System power menu selections: You can use the selections available from the System Power menu to: View data regarding the current server power status View data regarding the server power configuration Power the server off Power the server on To access these functions: 1. Use a terminal program to establish a connection with the Netfinity Advanced System Management Processor modem. 2. Log in to the Netfinity Advanced System Management Processor. When you have established a connection with the Netfinity Advanced System Management Processor, you will be prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the Netfinity Advanced System Management Processor. You can use one of two username and password combinations: The default username (USERID) and password (PASSW0RD) Note The default username and password is case sensitive. You must use all caps, and the "0" in PASSW0RD, is the numeral zero. A username and password that you define using the Advanced System Management service and Netfinity Manager Important If you update the Netfinity Advanced System Management Processor microcode, the default username (USERID) and password (PASSW0RD) are reset. If applicable, notify the system administrator. 56 Netfinity Server HMM