IBM 86624RY Maintenance Manual - Page 290
System board removal, Configuration/Setup Utility program
UPC - 087944490654
View all IBM 86624RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
System board removal Notes 1. Read "Safety information" on page 340. 2. If possible, record the configuration settings before removing the system board (see "Configuration/Setup Utility program" on page 21). To remove the system board, do the following: 1. Turn off the server and peripheral devices and disconnect all external cables and power cords (see "Preparing to install options" on page 246); then remove the top cover (see "Top cover removal" on page 284). 2. Disconnect all adapter cables and remove the adapters (see "Hot-plug PCI adapter installation" on page 165). 3. Remove the adapter dividers. a. Press on the adapter divider release tab 1 and lift the divider out of the system. b. Repeat the procedure for each adapter divider. 4. Remove the processor board support tray (see "Processor support tray removal" on page 259). 5. Disconnect all system board cables. 6. Remove the system board dust cover 1 . 282 Netfinity Server HMM