IBM 86624RY Maintenance Manual - Page 163
Installing IPSSEND and IPSMON for OS/2, Windows NT, or NetWare, IBM ServeRAID Command Line
![]() |
UPC - 087944490654
View all IBM 86624RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Microsoft Windows NT SCO OpenServer 5.0.X SCO UnixWare 7.0 You also can use the IPSSEND program with DOS, but DOS requires the ASPI Manager. Installing IPSSEND and IPSMON for OS/2, Windows NT, or NetWare: To install these programs for OS/2, Windows NT, or NetWare: 1. After you create an IBM ServeRAID Command Line Programs Diskette using Diskette Factory or by downloading the image from the IBM Support Page on the World Wide Web, start the server. 2. After the operating system loads, insert the IBM ServeRAID Command Line Programs Diskette into the diskette drive. 3. If you are using NetWare, go to step 5. If you are using Windows NT or OS/2, create an IPSADM directory on the hard disk drive. To do this, go to the operating system command prompt and type: md c:\ipsadm Notes 1. The c represents the drive where OS/2 or Windows NT is installed. 2. If you installed the Administration and Monitoring Program files, you already created this directory. 4. Press Enter. 5. Copy the IPSSEND.EXE file to the hard disk drive by typing one of the following at the command prompt: For OS/2, type: copy a:\os2\ipssend.exe c:\ipsadm For Windows NT, type: copy a:\nt\ipssend.exe c:\ipsadm For NetWare, type: copy a:\netware\ipssend.nlm c:\nwserver Notes 1. The a represents the drive assignment for the diskette drive that contains the ServeRAID diskette. 2. The c represents the drive where OS/2, Windows NT, or NetWare is installed. 3. These instructions assume that you installed NetWare in the NWSERVER directory. Netfinity 5500 M20 - Type 8662 155
![](/manual_guide/products/ibm-86624ry-maintenance-manual-8d18aa9/163.png)