IBM 86624RY Maintenance Manual - Page 151

Starting the Administration and Monitoring Program: To start the ServeRAID Administration and Monitoring Program for OS/2: 1. Go to the OS/2 subdirectory on the hard disk drive; then, type: ipsradm /lf=d:\path\logfile Notes 1. Make sure that the path you type exists. The program will not create a path. 2. Logfile is where the program will log messages. 3. If you omit the /lf parameter, the program will create the IPSRADM.LOG default file in the OS2 subdirectory to log the program messages. 2. Press Enter. 3. Use the following steps if you want to define IPSRADM to OS/2: a. Open the Templates Folder on the OS/2 Desktop. b. Drag a program template onto the Desktop. A Program Settings window will appear. c. At the Program page in the Path and File Name field, type: c:\os2\ipsradm.exe d. In the Parameters field, type: /lf=d:\path\logfile e. At the General Tab in the Title field, type: ServeRAID Installing ServerRAID device drivers for OpenServer: To use the ServeRAID Administration and Monitoring Program with SCO, you must first install the WIN32-Based version of the Administration and Monitoring Program on a Windows NT or Windows 95 client. Then, attach the Windows NT or Windows 95 client to the same network as the OpenServer systems that contain the ServeRAID adapters or controllers. Finally, you must install the ServeRAID device driver and background-server component for OpenServer. The background-server component for OpenServer installs automatically when you use the instructions in this chapter to install the ServeRAID OpenServer device driver. This component enables the OpenServer system to act as the TCP/IP interface for the remote WIN32-Based Program. (See "ServeRAID programs for Windows NT and Windows 95" on page 131 for more information.) Netfinity 5500 M20 - Type 8662 143