IBM 86624RY Maintenance Manual - Page 54

Note An x value that follows an error code represents any alphanumeric character. Table 2 (Page 1 of 3). Ethernet controller messages Error Code Description RPL-ROM-ERR: 100 The integrated Ethernet controller cannot be found. RPL-ROM-ERR: 101 The integrated Ethernet controller was unable to initialize. RPL-ROM-ERR: 102 The integrated Ethernet controller could not be reset. RPL-ROM-ERR: 103 There are multiple Ethernet controllers or adapters in the system. Specify the correct serial number in the NET.CFG file. RPL-ROM-ERR: 104 The integrated Ethernet controller EEPROM is faulty or not present. RPL-ROM-ERR: 106 The integrated Ethernet controller is configured for Plug and Play in a non-Plug and Play system. RPL-ROM-ERR: 110 The integrated Ethernet controller RAM failed the memory test. E61 Service boot (startup) canceled; that is, the boot diskette image was not downloaded from the network. E62 Cannot initialize controller. E63 Cannot initialize controller. E67 Cannot initialize controller. E6d Cannot find boot protocol (BOOTP) server. E6e Cannot start from downloaded image. E71 Too many multicast trivial file transfer protocol (MTFTP) packages. M10 Address resolution protocol (ARP) canceled by keystroke. M11 ARP timeout. M20 Cannot copy memory. M21 Cannot write to memory. 46 Netfinity Server HMM