IBM 86624RY Maintenance Manual - Page 269

Processor support tray installation See the illustration in "Processor support tray removal" on page 259 while you perform the steps in this section. To install the processor support tray: 1. Grasp the processor support tray 1 by the handles 5 , lift the support tray, and orient the processor support tray with the cable connectors toward the front of the server. Attention When you install the processor support tray in the server, make sure that it is aligned correctly before you seat it in the shuttle. Incorrect seating might damage server components. 2. Align the processor support tray with the processor support tray guide on the inside rear of the server. Carefully lower the processor support tray into the shuttle until it is fully seated. 3. Install and tighten the four blue thumbscrews 4 on the processor support tray 1 . 4. Connect the cables that you disconnected when you removed the processor support tray. Netfinity 5500 M20 - Type 8662 261