IBM 86624RY Maintenance Manual - Page 149
Installing the files after installing OS/2, IPSRADM.HLP Help file to the \OS2\HELP
UPC - 087944490654
View all IBM 86624RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Note The a represents the drive assignment for the diskette drive that contains the ServeRAID diskette. 8. Press Enter. Then, type: ddinstal 9. Press Enter. The OS/2 Device Driver Installation window will appear and prompt you for the source and destination drives. The source directory shows where to insert the IBM ServeRAID Device Driver Diskette. The destination directory shows where the program will copy the device driver files. 10. Select Install. The program copies the following ServeRAID device driver and program files to the OS/2 subdirectory on the hard disk: IPSRAID.ADD, IPSADM.EXE, and IPSRADM.EXE. The program copies the ServeRAID IPSRADM.HLP Help file to the \OS2\HELP directory. 11. Edit the CONFIG.SYS file and verify that there is only one copy of the line BASEDEV=IPSRAID.ADD. Notes 1. If you have more than one ServeRAID or SCSI adapter in the system, make sure that the BASEDEV statement for the adapter controlling the startup (boot) device appears before the BASEDEV statements for other ServeRAID or SCSI adapters in the CONFIG.SYS file. 2. After you install any service packs, check the path for the IPSRAID.ADD device driver and verify that the correct device driver is installed. 12. Restart the server. Installing the files after installing OS/2: You can use the following instructions to install the ServeRAID device driver and Administration and Monitoring Program files after installing OS/2 Warp Server. To install the ServeRAID files after installing OS/2: 1. Use the ServerGuide Diskette Factory to create an IBM ServeRAID Device Driver Diskette. 2. After you complete the OS/2 installation, insert the IBM ServeRAID Device Driver Diskette. 3. From an OS/2 window, type: a: Netfinity 5500 M20 - Type 8662 141