IBM 86624RY Maintenance Manual - Page 86

8. If free space is available and you want to define another logical drive, click on the Add Logical Drive button in the Main Panel. 9. Repeat steps 6, 7, and 8 for each logical drive that you want to define; then, continue with step 10. 10. Select the Next button. 11. Review the information that appears on the Configuration Summary screen. Note To change the configuration, select a Modify icon button. 12. Select the Apply button to accept and save the configuration. 13. If you have not already done so, install the operating system. See the server documentation or the documentation provided with the operating system for more information. After you install the operating system, see "ServeRAID device drivers and utility programs (installation)" on page 130 (or the installation instructions provided with the server) for information about installing the ServeRAID device drivers and utility programs. Information mode: You can use the Information mode to view the configuration information for the server, ServeRAID controllers, arrays, logical drives, hot-spare drives, and physical drives that make up the ServeRAID subsystem. You also can use this mode to change some of the ServeRAID controller settings. Viewing the Device and Configuration Information To view the current settings: 1. Select the plus (+) box next to the object in the Main Tree to expand that portion of the tree. 2. Select the icon for the server, ServeRAID controller, array, logical drive, hot-spare drive, or physical drive to view its current settings. Detailed information about the selected device will appear in the Main Panel on the right. The following pages provide descriptions of the device information that might appear. System Information Panel When you select the server from the Main Tree, the following information appears in the Main Panel on the right: System Name shows the name you assigned to the server. 78 Netfinity Server HMM