IBM 86624RY Maintenance Manual - Page 175
Power light for that PCI slot., Disabling the PCI slot turns off
UPC - 087944490654
View all IBM 86624RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
1 Tab 2 Adapter retention latch 3 - 6 See preceding page 7 Adapter 8 Adapter retention latch To install a hot-plug PCI adapter: 1. Remove the top cover (see "Top cover removal" on page 284). 2. Determine which expansion slot you will use for the adapter. Note Only PCI slots 1-4 can be used for hot-plug PCI adapters. 3. Disable the selected PCI slot from the operating system. (Refer to the documentation that comes with the operating system for information about disabling a hot-plug PCI slot.) Disabling the PCI slot turns off the Power light for that PCI slot. Attention Make sure the Power light 5 for the hot-plug PCI slot is off before you continue to the next step. 4. Remove the expansion-slot cover 3 : a. Rotate the orange adapter retention latch 2 counterclockwise. Netfinity 5500 M20 - Type 8662 167