IBM 86624RY Maintenance Manual - Page 199
Video port, Keyboard and auxiliary-device ports, Configuration/Setup Utility program.
![]() |
UPC - 087944490654
View all IBM 86624RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
When you turn on the server, the POST routine assigns the parallel port a specific port address. You can change the parallel-port assignment by using the Configuration/Setup Utility program. Video port: The system board in the server has one SVGA video port. This port is used to attach a video monitor. The video port has a 15-pin analog connector on the back of the server. (See "Input/output connectors and expansion slots" on page 209 for the location of the connector.) 5 1 15 11 The following table shows the pin-number assignments for the video connector. Table 5. Video port pin-number assignments Pin Signal 1 Red 2 Green or monochrome 3 Blue 4 Monitor ID bit 2 5 Ground 6 Ground 7 Ground 8 Ground 9 +5 V dc 10 Ground 11 Monitor ID bit 0 12 DDC SDA 13 Horizontal synchronization (Hsync) 14 Vertical synchronization (Vsync) 15 DDC SDL Keyboard and auxiliary-device ports: The system board has one keyboard port and one auxiliary-device port that supports a mouse or other pointing device. (See "Input/output connectors and expansion slots" on page 209 for the locations of the connectors.) 6 5 4 3 2 1 The following table shows the pin-number assignments for the connectors used by the keyboard and auxiliary-device ports. Netfinity 5500 M20 - Type 8662 191
![](/manual_guide/products/ibm-86624ry-maintenance-manual-8d18aa9/199.png)