IBM 86624RY Maintenance Manual - Page 65

When you have logged into the Netfinity Advanced System Management Processor, the following main menu appears: 2 Monitors 3 Error Logs 4 Service Processor Configuration 5 System Services 6 System Power 7 Boot B Remote Terminal Status Y Disconnect Current Logon Z Start Remote Video 3. Select 6 System Power. The following System Power menu appears: 1 Current Power Status 2 Power Configuration 3 Power On 4 Power Off 4. Select a System Power menu item. Select 1 Current power Status for information about the current server power status. Select 2 Power Configuration for information about the server power configuration. Select 3 Power On to power the server on (if it is currently powered off). Select 4 Power Off to power the server off (if it is currently powered on). Boot menu selections: You can use the selections available from the Boot menu to: Shutdown the server operating system and then restart the server Restart the server immediately, without first performing an operating system shutdown Restart the Netfinity Advanced System Management Processor To access these functions: 1. Use a terminal program to establish a connection with the Netfinity Advanced System Management Processor modem. 2. Log in to the Netfinity Advanced System Management Processor. When you have established a connection with the Netfinity Advanced System Management Processor, you will be prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the Netfinity Advanced System Management Processor. You can use one of two username and password combinations: The default username (USERID) and password (PASSW0RD) Netfinity 5500 M20 - Type 8662 57