IBM 86624RY Maintenance Manual - Page 296

Beep/Symptom 3-3-1 (Memory size mismatch occurred, see"Memory settings" on page 30 ) 3-3-2 (Critical SMBUS error occurred) 3-3-3 (No operational memory in system) Two Short Beeps (Information only, the configuration has changed) Three Short Beeps One Continuous Beep Repeating Short Beeps One Long and One Short Beep One Long and Two Short Beeps Two Long and Two Short Beeps FRU/Action 1. DIMM 2. Processor Board 3. Battery 1. Disconnect the server power cord from outlet, wait 30 seconds and retry. 2. Processor Board 3. Memory DIMMs 1. Install or reseat the memory modules, then do a 3 boot reset (see "Configuration/Setup Utility program" on page 21) 2. DIMMs 3. Memory Board 4. Processor Board 5. System Board 1. Run Diagnostics 2. Run Configuration/Setup 1. DIMM 2. Processor Board 3. System Board 1. Processor 2. Optional Processor (if installed) 3. Processor Board 4. System Board 1. Keyboard 2. System Board 1. Video adapter (if present) 2. System Board 3. 1. Video adapter (if present) 2. System Board 1. Video adapter No beep symptoms No Beep Symptom No beep and the system operates correctly. FRU/Action 1. Check speaker cables 2. Speaker 3. System Board 288 Netfinity Server HMM