IBM 86624RY Maintenance Manual - Page 212
Turn the two processor support tray cover, needs to be replaced
UPC - 087944490654
View all IBM 86624RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
3. If you are replacing fan assembly 1, 2, or 3: a. Disconnect the fan power cable 3 from the fan assembly that you are replacing. b. If you are removing fan assembly 1 4 , turn the two quarter-turn fasteners 2 one quarter turn and remove the processor support tray cover 2. c. Turn the fan assembly quarter-turn fastener 1 one quarter turn and remove the fan assembly from the server. d. Slide the replacement fan assembly into the server. (If you are replacing fan assembly 1 4 , make sure the tabs 5 fit into the slots at the bottom of the fan opening in the server.) e. When you have the fan assembly correctly seated, turn its quarter-turn fastener 1 one quarter turn to secure the fan in the server. f. If you removed the processor support tray cover 1 , install it and turn the two quarter-turn fasteners 2 one quarter turn to secure the cover. g. Connect the fan power cable 3 to the power connector. 4. If fan assembly 4 7 needs to be replaced: a. Turn the two processor support tray cover quarter-turn fasteners 2 one quarter turn and remove the processor support tray cover 1 . b. Lift up on the fasteners 8 for fan assembly 4 7 and remove the fan assembly from the server. c. Slide the replacement fan assembly into the server. (Make sure the fan assembly fits into the slots on the processor support tray.) d. When you have the fan assembly correctly seated, push down on the fasteners 8 until they click into place. e. Install the processor support tray cover 1 turn the two quarter-turn fasteners 2 one quarter turn to secure the cover. 5. Replace the top cover (see "Installing the top cover" on page 178). 204 Netfinity Server HMM