IBM 86624RY Maintenance Manual - Page 234

2. After you remove the rear panel, do one of the following: Install a device on rails in the NetBAY3. (Go to "Installing devices on side rails.") Install a cantilevered device in the NetBAY3. (Go to "Installing cantilevered devices" on page 228.) Install a device on the NetBAY3 base plate. (Go to "Installing devices on the NetBAY3 base plate" on page 229.) Installing devices on side rails: Installing devices that sit on side rails in a NetBAY3 is similar to installing these devices in a rack enclosure. The device side rails must be screwed to the NetBAY3 vertical mounting rails. Follow the instructions in the documentation that comes with the device and use the following illustrations as a guide. If you need to remove or move the cage nuts at the rear of the NetBAY3 to hold the rails, go to "Removing cage nuts" on page 227. 226 Netfinity Server HMM