IBM 86624RY Maintenance Manual - Page 301

Diagnostic error codes Attention In the following error codes, if XXX is 000, 195, or 197 do not replace a FRU. The description for these error codes are: 000 The test passed. 195 The Esc key was pressed to abort the test. 197 This is a warning error and may not indicate a hardware failure. For all error codes, replace/follow the FRU/Action indicated. Error Code/Symptom 001-XXX-000 (Failed core tests) 001-XXX-001 (Failed core tests) 001-250-000 (Failed System Board ECC) 001-250-001 (Failed Processor Board ECC) 005-XXX-000 (Failed Video test) 011-XXX-000 (Failed COM1 Serial Port test) Note: The external loopback test of Serial Port A will fail if run remotely. 011-XXX-001 (Failed COM2 Serial Port test) 014-XXX-000 (Failed Parallel Port test) 015-XXX-001 (Failed USB test) 020-XXX-000 (Failed PCI Interface test) 020-XXX-001 (Failed Hot-Swap Slot 1 PCI Latch test) 020-XXX-002 (Failed Hot-Swap Slot 2 PCI Latch test) 020-XXX-003 (Failed Hot-Swap Slot 3 PCI Latch test) FRU/Action 1. System Board 1. Processor Board 1. System Board 1. Processor Board 2. System Board 1. System Board 2. Processor Board 1. System Board 1. System Board 1. System Board 1. System Board 1. Processor Board 2. System Board 1. PCI Hot-Swap Latch Assembly 2. System Board 1. PCI Hot-Swap Latch Assembly 2. System Board 1. PCI Hot-Swap Latch Assembly 2. System Board Netfinity 5500 M20 - Type 8662 293