Kyocera KM-4050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 179
Responding to Error Messages, Alphanumeric - error codes
View all Kyocera KM-4050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Troubleshooting Responding to Error Messages If the touch panel displays any of these messages, follow the corresponding procedure. Alphanumeric Error Message Checkpoints Corrective Actions Reference Page Acceptable staple Is the acceptable staple Press [Continue] to print without - count exceeded. count exceeded? For stapling. details, refer to Press [Cancel] to cancel the job. Specifications on page Appendix-9,10,11. Add paper in cassette Is the indicated cassette out Load paper. #. of paper? 2-34 Add paper in Multi Purpose tray. Is the paper of the selected size loaded in the Multi Purpose Tray? Load the paper in the Multi Purpose Tray which is of the size and type indicated on the touch panel. 2-37 Add staples. Has any of the built-in If the staples are depleted, the 4-6 finisher, center binding machine will stop and the location of finisher, document finisher staple depletion will be indicated on or 3,000-sheet capacity the touch panel. document finisher run out of Leave the machine on and follow the staples? instruction to replace the staple case. Press [Continue] to print without stapling. Press [Cancel] to cancel the job. Add toner. - Replace the toner container. 5-7 An error has occurred. - Box limit exceeded. - Internal error has occurred. - Turn the main power switch off and on. If error occurs repeatedly, make a note of the error code displayed on the touch panel, and contact your Service Representative. Document box is full, and no further - storage is available; the job is canceled. Press [End]. - Repeat Copy box is full, and no - further repeat copy is available. Press [Continue] to print without using Repeat Copy. Press [Cancel] to cancel the job. OPERATION GUIDE 6-5