Kyocera KM-4050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 56

Preparation before Use 2 In COMMAND CENTER, click Advanced -> Management > LDAP. 3 Enter the correct settings in each field. The settings to be specified in the LDAP settings screen are shown below. Item LDAP LDAP Server Name LDAP Port Number Search Timeout Login User Name Login Password Max Search Results Search Base Display Mode Description Enables or disables access to the LDAP server. Enter the LDAP server IP address or name. The maximum length of the LDAP server name is 62 characters. Enter the port number used by the LDAP server. Normally, 389 is used. Enter the duration of LDAP server searches. You can enter any number between 5 and 60. Enter the user name used for LDAP logon. The maximum length of the login user name is 62 characters. Enter the password used for LDAP logon. The maximum length of the login password is 62 characters. Enter the maximum number of results displayed when the LDAP address book is searched. You can enter any number between 4 and 30. Specify the starting point for LDAP directory searches. Selects the default display mode from Display from the first name and Display from the family name. 4 Click Submit. 2-26 OPERATION GUIDE