Kyocera KM-4050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 58

Preparation before Use 4 Select [Local Authentic.] or [Network Authentic.] User Login/Job Accounting - User Login User login administration. Please select authentication method. to enable user login administration. Selecting [Off] disables user login administration. Off Local Authentic. Network Authentic. Host Name Domain Name Server Type If you select NTLM (WinNT) Kerberos (Win2000/2003) [Network Authentic.], enter Status Cancel OK 10/5/2006 10:10 the host name (62 characters or less) and domain name (254 characters or less) for the Authentication Server. Select [NTLM (WinNT)] or [Kerberos (Win2000/ 2003)] as the authentication method. NOTE: If the login user name and password are rejected, check the following settings. • Network Authentication setting of the machine • User properties of the Authentication Server • Clock time setting of the machine and the Authentication Server If you cannot login because of the setting of the machine, login as any administrator registered in the local user list and correct the settings. If the server type is [Kerberos (Win2000/2003)], only domain names entered in uppercase will be recognized. 5 Press [OK]. Login/Logout If user login administration is enabled, it is necessary to enter the login user name and password to use the machine. Login 1 If the screen shown appears during operations, press [Login User Name]. Enter login user name and password. Login User Name Login Password abcdef ******** 2-28 Status 2 Enter the login user name and press [OK]. Login 10/5/2006 10:10 OPERATION GUIDE