Kyocera KM-4050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 36
Connecting Parallel/USB Cable (Optional), Power, When Connecting to Parallel Interface
View all Kyocera KM-4050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Preparation before Use Connecting Parallel/USB Cable (Optional) Follow the steps below to connect a parallel or USB printer cable to the machine. 1 When the machine is powered up, first press the Power key on the operation panel. Check that the Power indicator and the memory indicator are off. After this, turn off the main power switch. Check that the indicators are off. 2 If connection is established using a parallel cable, the PC to be connected should also be powered off. 3 Connect the printer cable to the appropriate interface located on the right side of the body. When Connecting to Parallel Interface 2-6 OPERATION GUIDE
Preparation before Use
2-6
OPERATION GUIDE
Connecting Parallel/USB Cable (Optional)
Follow the steps below to connect a parallel or USB printer cable to the
machine.
1
When the machine is powered up, first press the
Power
key on the
operation panel. Check that the
Power
indicator and the memory indicator
are off. After this, turn off the main power switch.
2
If connection is established using a parallel cable, the PC to be connected
should also be powered off.
3
Connect the printer cable to the appropriate interface located on the right
side of the body.
When Connecting to Parallel Interface
Check that the indicators
are off.