Kyocera KM-4050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 185

Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Staple error. - If a staple error occurs, the machine - will stop and the corrective action will be indicated on the touch panel. Leave the machine on and follow the instruction to take an appropriate action. Staple jam. - If a staple jam occurs, the machine 4-8 will stop and the location of the jam will be indicated on the touch panel. Leave the machine on and follow the instruction to remove the jammed staple. The ID is not - registered. The Account ID does not match. - Check the registered Account ID. The memory card is Is the memory card Format the memory card. - not formatted. formatted? The phone receiver is - off the hook. Put down the receiver. - The removable Is the removable memory Use the removable memory - memory is not formatted by this machine? formatted by this machine. formatted. The source file is not - found. The specified file is not found. The - job is canceled. Press [End]. Top tray of the - machine is full of paper. Remove paper from the top tray, and - press [Continue] to resume the job. Tray # is full of paper. Is the acceptable storage Remove paper from the tray # - capacity exceeded for any of indicated on the touch panel. the trays A to C of the 3,000- If the tray B or C is full of paper, press sheet capacity document [Continue] to resume printing. finisher? Warning low memory. - Further scanning cannot be - performed due to insufficient memory. Press [Continue] to print the scanned pages. Press [Cancel] to cancel the printing job. OPERATION GUIDE 6-11