Kyocera KM-4050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 42
Accessing COMMAND CENTER (Settings for Network and Transmission), Preparation before Use
View all Kyocera KM-4050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Preparation before Use Accessing COMMAND CENTER (Settings for Network and Transmission) COMMAND CENTER is a tool used for tasks such as verifying the operating status of the machine and changing the settings for security, network printing, E-mail transmission and advanced networking. NOTE: Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the Fax Kit Operation Guide. The procedure for accessing COMMAND CENTER is explained below. 1 Launch your Web browser. 2 In the Address or Location bar, enter the machine's IP address. E.g.) http://192.168.48.21/ The web page displays basic information about the machine and COMMAND CENTER as well as their current status. 3 Select a category from the navigation bar on the left of the screen. The values for each category must be set separately. If restrictions have been set for COMMAND CENTER, enter the correct user name and password to access pages other than the startup page. 2-12 OPERATION GUIDE