Kyocera KM-4050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 66
Preparation before Use, OPERATION GUIDE, Turn the size switch A 90°.
View all Kyocera KM-4050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Preparation before Use 3 Using the paper length adjusting tab, move the plate to fit the paper. NOTE: Paper sizes are indicated on the cassettes. To change between inch size and metric size (A, B sizes), follow the steps below to A adjust the size switch. 1. Holding the paper width adjusting tab, move the B paper width guide to a position other than that of the paper. 2. Turn the size switch A 90°. > 3. Move the size lever B up (C) or down (I). C:metric size (centimeters) (A, B sizes) I:inch size 4. Turn the size switch 90°to lock it. > 4 Align the paper flush against the left side of the cassette. 2-36 OPERATION GUIDE
Preparation before Use
2-36
OPERATION GUIDE
3
Using the paper length
adjusting tab, move the plate
to fit the paper.
NOTE:
Paper sizes are
indicated on the cassettes.
To change between inch size
and metric size (A, B sizes),
follow the steps below to
adjust the size switch.
1. Holding the paper width
adjusting tab, move the
paper width guide to a
position other than that of
the paper.
2.
Turn the size switch A 90°.
>
3. Move the size lever B up (C) or down (I).
C:metric size (centimeters) (A, B sizes)
I:inch size
4. Turn the size switch 90°to lock it.
>
4
Align the paper flush against
the left side of the cassette.
A
B