Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 117
Enabled, Disabled, Specific
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide Parameter descriptions: NNI Ports : For each port select Disabled, NNI, Root, or Leaf. The default is Disabled. EVC Parameters : EVC ID : The EVC ID identifies the EVC. The valid range is 1 - 454. The default is 0. Name : The name for the EVC. VID : The VLAN ID in the PB network. It may be inserted in a C-tag, S-tag or S-custom tag depending on the NNI port VLAN configuration. The valid range is 0 - 4095. IVID : The Internal/classified VLAN ID in the PB network. The valid range is 1 - 4095. Learning : The learning mode for the EVC controls whether source MAC addresses are learned for frames matching the EVC. Learning may be disabled if the EVC only includes two UNI/NNI ports. Valid values are: Enabled: Learning is enabled (MAC addresses are learned). Disabled: Learning is disabled (MAC addresses are not learned). MPLS PW IDs : Attach EVC to MPLS Pseudo-Wires. MPLS PW Split-Horizon IDs : Attach EVC to MPLS split-horizon Pseudo-Wires. Split-horizon is just an attribute saying that traffic received on another non-split-horizon PW cannot be forwarded to this split-horizon PW. E-Tree Leaf Parameters Leaf VID : The leaf VLAN ID used in the outer tag for the EVC. Leaf IVID : The leaf internal classified VLAN ID for the EVC. Leaf Ports : The list of leaf ports for the EVC. NNI QoS Map Parameters HQoS IDs : The list of HQoS entries mapped to the EVC ports and a link to configure the mappings. HQoS (Hierarchical Quality of Service) is a method of QoS that can be configured at a service level. Ingress Map Mode : The NNI QoS ingress map mode or specific map ID for the EVC. Disabled: The QoS ingress map mode is disabled for the EVC. Specific: Specify a specific map ID for the EVC. Ingress Map ID : Specify a specific map ID for the EVC. The valid range is 0 - 255. The default is 0. Egress Map Mode : The NNI QoS egress map mode or specific map ID for the EVC. Disabled: The QoS egress map mode is disabled for the EVC. Specific: Specify a specific map ID for the EVC. Egress Map ID : Specify a specific map ID for the EVC. The valid range is 0 - 511. The default is 0. 33763 Rev. G https://www.transition.com Page 117 of 496