Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 36
LLDP Neighbor
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide 3-4.3 LLDP Neighbor This page provides a status overview for all LLDP neighbors. The displayed table contains a row for each port on which an LLDP neighbor is detected. If there is no device that supports LLDP in your network then the table will show "No LLDP neighbor information found". To show LLDP neighbors: 1. Click System, LLDP and LLDP Neighbor. 2. Click Refresh to immediately update the page. 3. Click Auto-refresh to automatically update the page every 3 seconds. Figure 3-4.3: LLDP Neighbor information Parameter descriptions: Local Port : The port on which the LLDP frame was received. Chassis ID : The identification of the neighbor's LLDP frames. Port ID : The identification of the neighbor port. Port Description : The port description advertised by the neighbor unit. System Name : System Name is the name advertised by the neighbor unit. System Capabilities : System Capabilities describes the neighbor unit's capabilities. The possible capabilities are: 1. Other 4. WLAN Access Point 7. DOCSIS cable device 2. Repeater 5. Router 8. Station only 3. Bridge 6. Telephone 9. Reserved When a capability is enabled, the capability is followed by (+). If the capability is disabled, the capability is followed by (-). 33763 Rev. G https://www.transition.com Page 36 of 496