Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 241
DHCP Server Status
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide 14-3.2 Status This page displays DHCP server status. To display DHCP server status in the web UI: 1. Click DHCP, Server, and Status. 2. To auto-refresh the information check "Auto-refresh". 3. Click "Refresh" to refresh an entry of the DHCP server status. Figure 14-3.2: DHCP Server Status Parameter descriptions: Interfaces: VLAN: The VLAN ID of the entry. Type : Indicates the operation type per VLAN. Network: to service more than one DHCP client. Host: for a specific DHCP client identified by client identifier or hardware address. Start IP and End IP : Displays the Start IP address and the End IP address. Lease Time : Displays lease time of the pool. Subnet Mask : Displays subnet mask of the DHCP address. Default Router : Displays the destination IP network or host address of this route. DNS Server : Displays DNS server's IP address. IP Binding Status IP: The leased IP address. VLAN: The VLAN ID of the entry. State: The current state of the IP address (e.g., allocated or committed). MAC: The hardware address of the device. Expiration: The left lease time be expired in the format 21 hours 42 minutes 40 seconds. 33763 Rev. G https://www.transition.com Page 241 of 496