Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 134
PM Transfer Configuration, Parameter descriptions, PM Transfer Mode, Scheduled Hours, Scheduled
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Transition Networks 8-2 PM Transfer Configuration This page lets you view and configure current PM Transfer parameters. SISPM1040-3xxx-L Web User Guide PM Transfer Configuration Parameter descriptions: PM Transfer Mode : click to turn the PM Transfer function on or off globally. The default is off. Scheduled Hours : Select one or more of the 24 hours in a day, when PM data transfer will happen. The selections are in one hour increments from 00:00 to 23:00. The default is none selected. Scheduled Minutes : Select one or more of the four 15 minutes in an hour, when PM data transfer will happen. The selections are 00:00, 00:15, 00:30, or 00:45. The default is none selected. Scheduled Offset : Enter a fixed offset that is added to the scheduled transfer time. The range is 0-15 minutes. The default is 0 minutes. Note: The sum of Scheduled Fixed Offset and Scheduled Random Offset must not exceed 15 minutes. Random Offset : It is possible to configure a random offset that is added to the scheduled transfer time. The offset added to the scheduled transfer time must be a random value in the range 0-Scheduled Offset. The range is 0-900 seconds. The default is 0 seconds. Note: The sum of Scheduled Offset and Random Offset must not exceed 15 min. Server Directory URL : It is possible to configure the full URL of the server and the corresponding directory (if any) for uploading. The supported protocols are HTTP and TFTP. To enable HTTP enter http:// followed by the domain name or IP address. To enable TFTP enter tftp:// followed by the domain name or IP address. 33763 Rev. G https://www.transition.com Page 134 of 496