Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 428
All rates con d in a profile are interpreted as requested rates on the customer-facing side
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 428 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide 25-6.2.2 RFC2544 Profile Configuration A profile defines key parameters and sub-tests to be executed as part of the RFC2544 benchmark testing. The profile configuration is divided into a common section, which contains parameters shared by the four tests that can be defined for a profile. At least one of the four tests must be enabled. All rates configured in a profile are measured in ‰ of the line rate. The reason for not using bits per second or other units is that egress ports may be configured at various speeds, so in order to have a link-speed independent way of configuring rates, a percentage (‰) of the line rate is chosen. All rates configured in a profile are interpreted as requested rates on the customer-facing side of the switch. The egress port on which the tests are conducted is considered the network-facing side. If the switch adds a VLAN tag to frames (see Type), the rate on the network-facing side will therefore be higher than the requested customer-facing side's rate, except that the rate cannot exceed the line rate. 33763 Rev. G https://www.transition.com Page 428 of 496