Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 384
Buttons, Ports Configuration
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 384 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide CommState : The state of the communication with the master, possible values are: IDLE : The entry is not in use. INIT : Announce is sent to the master (Waiting for a response). CONN : The master has responded. SELL : The assigned master is selected as current master. SYNC : The master is sending Sync messages. Buttons Apply : Click to save changes. Reset : Click to undo any changes made locally and revert to previously saved values. Ports Configuration When you click 'Ports Configuration' (on the PTP Clock's Configuration and Status page) the Ports Configuration page displays as shown and described below. Note that an empty table displays if you have not configured any ports yet. The port data set is defined in the IEEE 1588 Standard. It holds three groups of data: the static members, the dynamic members, and configurable members which can be set here. Parameter descriptions : Port Data Set Port : Static member port Identity : Port number [1..max port no] Stat : Dynamic member portState: Current state of the port. MDR : Dynamic member log Min Delay Req Interval: The delay request interval announced by the master. Peer Mean Path Del : The path delay measured by the port in P2P mode. In E2E mode this value is 0. Anv : The interval for issuing announce messages in master state. Range is -3 to 4. 33763 Rev. G https://www.transition.com Page 384 of 496