Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 64

Transition Networks SISPM1040-3xxx-L Web User Guide 4-5.6 Neighbor Status This page provides a status overview of the LACP neighbor status for all ports. Only ports that are part of an LACP group are shown. For details on the shown parameters refer to IEEE 801.AX-2014. Web Interface To display the LACP Neighbor Port status in the web UI: 1. Click Port Management, Link Aggregation and Neighbor Status. 2. Check "Auto-refresh". 3. Click "Refresh" to refresh the port detailed statistics. Figure 4-5.5: LACP Neighbor Port Status Parameter descriptions: Aggr ID : The aggregation group ID which the port is assigned to. Port : The switch port number. State : The current port state: Down: The port is not active. Active: The port is in active state. Standby: The port is in standby state. Partner Key : The key assigned to this port by the partner. Partner Port : The partner port number associated with this link. Partner Port Priority : The priority assigned to this partner port . Activity : The LACP mode of the group (Active or Passive). Timeout :The timeout mode configured for the port (Fast or Slow). Aggregation : Show whether the system considers this link to be "aggregateable"; i.e., a potential candidate for aggregation. Synchronization :Show whether the system considers this link to be "IN_SYNC"; i.e., it has been allocated to the correct LAG, the group has been associated with a compatible Aggregator, and the identity of the LAG is consistent with the System ID and operational Key information transmitted. Collecting : Shows if collection of incoming frames on this link is enabled. Distributing : Shows if distribution of outgoing frames on this link is enabled. Defaulted : Shows if the Actor's Receive machine is using Defaulted operational Partner information. Expired : Show if that the Actor's Receive machine is in the EXPIRED state. 33763 Rev. G https://www.transition.com Page 64 of 496