Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 380
Ord-Bound, P2p Transp, E2e Transp, Master Only, Slave Only
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 380 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide Device Type : Indicates the Type of the Clock Instance. The Device Types include: Ord-Bound : clock's Device Type is Ordinary-Boundary Clock. P2p Transp : clock's Device Type is Peer to Peer Transparent Clock. E2e Transp : clock's Device Type is End to End Transparent Clock. Master Only : clock's Device Type is Master Only. Slave Only : clock's Device Type is Slave Only. Profile : Indicates the profile used by the clock. Apply Profile Defaults : If the clock has been configured to use a profile, clicking the 'Apply' button will reset configured values to profile defaults. Filter Type : The PTP filter type determines should match the operating conditions of the network and the PTP profile. Filter Types include: PTP Profile 1588 SyncE enabled (hybrid) No 1588 Yes 1588 No 1588 Yes None No Filter Type Description ACI_BASIC_PHASE ACI_BASIC_PHASE_SYNCE ACI_BASIC_PHASE_LOW ACI_BASIC_PHASE_LOW_SYNCE ACI_BC_FULL_ON_PATH_FREQ Requires PTP Sync and Delay_req frame rate of 16 fps or higher. Requires PTP Sync and Delay_req frame rate of 16 fps or higher. Use when the PTP Sync and Delay_req frame rate is between 1 fps to 16 fps. Use when the PTP Sync and Delay_req frame rate is between 1 fps to 16 fps. Used for Syntonized TC with basic filter. Port Enable and Configuration Port Enable : Set check mark for each port configured for this Clock Instance. Configuration : Click the linked text 'Ports Configuration' to edit the port data set for the ports assigned to this clock instance. Virtual Port Enable and Configuration Enable : Disabled or Enabled. I/O Pin : Virtual Port I/O Pin. The valid range is 0 to 3. Class : Clock class value for clock as defined in IEEE Std 1588. The valid range is from 0 - 255. Accuracy : Clock accuracy value as defined in IEEE Std 1588. The valid range is 0 - 255. Variance : offsetScaledLogVariance for clock as defined in IEEE Std 1588. The valid range is 0 - 65535. Pri1 : Clock priority 1 [0..255] used by the BMC master select algorithm. 33763 Rev. G https://www.transition.com Page 380 of 496