Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 376
Lantronix SISPM1040-3166-L Manual
![]() |
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 376 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide Chapter 23 - PTP 23-1 Configuration This page lets you configure and view up to four PTP clock instances. PTP (Precision Time Protocol) is a network protocol for synchronizing the clocks of computer systems. PTPv2 per IETF RFC 8173 defines a portion of the Management Information Base (MIB) module for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing PTP devices including ordinary clocks, transparent clocks, and boundary clocks. This MIB module is read-only and not intended to provide the ability to configure PTP clocks. Since PTP clocks are often embedded in other network elements such as routers, switches, and gateways, this ability is generally provided via the configuration interface for the network element. Web Interface To configure the PTP in the web interface: 1. Click PTP and Configuration. 2. Set the One_PPS_Mode. 3. Specify the parameters in each blank field. 4. Click the Apply button to save the settings. 5. To cancel the settings click the Reset button. It will revert to previously saved values 33763 Rev. G Figure 23-1: PTP Configuration https://www.transition.com Page 376 of 496
![](/manual_guide/products/lantronix-sispm10403166l-web-user-guide-rev-g-pdf-1413-mb-66b08af/376.png)