Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 167
IP Fragment, Sport, Dport, Protocol, SIP 32 LSB, DIP 32 LSB, Value
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide IPv4 : For Frame Type IPv4 select: Protocol IP protocol number: (0-255, 'TCP' or 'UDP') or 'Any'. SIP Specific Source IP address in value/mask format or 'Any'. IP and Mask are in the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and 255. When Mask is converted to a 32-bit binary string and read from left to right, all bits following the first zero must also be zero. DIP Specific Destination IP address in value/mask format or 'Any'. IP Fragment IPv4 frame fragmented option: 'Yes', 'No' or 'Any'. DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43. Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. IPv6 : For Frame Type IPv6 select: Protocol IP protocol number: (0-255, 'TCP' or 'UDP') or 'Any'. SIP (32 LSB) 32 LS bits of IPv6 source address in value/mask format or 'Any'. DIP (32 LSB) Specific Destination IP address in value/mask format or 'Any'. DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43. Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. Dport Destination TCP/UDP port : (0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. Value: e.g., 0 for Other protocol selection only. Buttons Apply : Click to save changes. Reset : Click to undo any changes made locally and revert to previously saved values. Cancel : Return to the previous page without saving the configuration change. Example: Messages: PCP and DEI cannot be set individually! 33763 Rev. G https://www.transition.com Page 167 of 496