Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 422

Transition Networks SISPM1040-3xxx-L Web User Guide Duration : The service performance test is executed in one single trial, whose duration is configured with this parameter. The drop-down box allows for selecting Y.1564-specified standard durations and a custom duration, selected by setting the drop-down box value to "User-defined" and specifying the duration in the "User-defined Duration" field below the drop-down box. User-defined Duration : When the "Duration" drop-down box is set to "User-defined", this field provides the desired duration. Valid range is 1 - 86400 with a default of 900 seconds. DM Interval : A Y.1731 1DM or DMM frame (depending on type of test) is transmitted every so many milliseconds, in order to perform delay measurements (DM). Select the number so that at least three DM frames are transmitted during a trial in order to obtain useful delay variation results. Configuring DST Refer to the Y.1564 Configuration Guide for help on configuring the remote end in case it is of the same brand as this switch. The remote end's loop configuration can be found in Diagnostics > Traffic Test > Loop on the DST switch. Contact Transition Networks Technical Support for the Y.1564 Software Configuration Guide; see Contact Us below. Buttons Apply : If all input parameters are valid, the profile will be part of the running config and the Y.1564 Profile Overview page displays the new profile (see the Example below). Reset : Click to undo any changes made locally and revert to previously saved or default values. Cancel : Return to the Y.1564 Profile Overview page without creating a new profile. Example 33763 Rev. G https://www.transition.com Page 422 of 496