Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 406
Cable Diagnostics
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 406 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide 25-3 Cable Diagnostics This page lets you run Cable Diagnostics for 10/100 and 1G copper ports. To run a Cable Diagnostics via the web UI: 1. Click Diagnostics and Cable Diagnostics. 2. Specify which Port you want to test. 3. Click Start. At the confirmation prompt click OK. This will take approximately 5 seconds. When completed, the page refreshes automatically, and you can view the cable diagnostics results in the cable status table. Note that Cable Diagnostics is only accurate for cables of length 7 - 120 meters with 5-meter accuracy. 10 and 100 Mbps ports will be linked down while running Cable Diagnostics. Therefore, running Cable Diagnostics on a 10 or 100 Mbps management port will cause the switch to stop responding until Cable Diagnostics is complete. Figure 25-3: Cable Diagnostics Parameter descriptions: Port : At the dropdown select the port for which you are requesting Cable Diagnostics. 33763 Rev. G https://www.transition.com Page 406 of 496