Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 66
Web Interface, LACP Status, Parameter descriptions, Aggr ID, Partner System ID,
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide 4-5.7 Port Status This page lets you set LACP function on the switch and provides a Port Status overview of all LACP instances. Web Interface To display the LACP Port status in the web UI: 1. Click Port Management, Link Aggregation and Port Status. 2. To auto-refresh the information click "Auto-refresh". 3. Click "Refresh" to refresh the LACP Port Status. Figure 4-5.6: LACP Status Parameter descriptions : Port : The switch port number. LACP : 'Yes' means that LACP is enabled and the port link is up. 'No' means that LACP is not enabled or that the port link is down. 'Backup' means that the port could not join the aggregation group but will join if other port leaves. Meanwhile its LACP status is disabled. Key : The key assigned to this port. Only ports with the same key can aggregate together. Aggr ID : The Aggregation ID assigned to this aggregation group. IDs 1 and 2 are GLAGs while IDs 3-14 are LLAGs. Partner System ID : The partner's System ID (MAC address). Partner Port : The partner's port number connected to this port. Partner Prio: The partner's port priority. Buttons Auto-refresh : Click to refresh the page automatically every 3 seconds. Refresh : Click to manually refresh the page immediately. 33763 Rev. G https://www.transition.com Page 66 of 496