Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 403

Transition Networks SISPM1040-3xxx-L Web User Guide Parameter descriptions: IP Address : Specify the target IP Address of the Ping. Ping Length : The payload size of the ICMP packet. Valid values are 2 - 1452 bytes. Ping Count : The count of the ICMP packet. Valid values are 1 - 60 times. Ping Interval :The interval of the ICMP packet. Valid values are 0 - 30seconds. Egress Interface (Only for IPv6) : The VLAN ID (VID) of the specific egress IPv6 interface where the ICMP packet goes. Valid VID ranges from 1 to 4094 and will be effective only when the corresponding IPv6 interface is valid. When the egress interface is not given, PING6 finds the best match interface for destination. Do not specify egress interface for loopback address. Do specify egress interface for link-local or multicast addresses. Buttons Start :Click the button to start to ping the target IP Address. New Ping : Back to ICMP Ping page. Sample Ping Output: ICMP Ping Output PING 192.168.1.77 (192.168.1.77): 56 data bytes 64 bytes from 192.168.1.77: seq=0 ttl=64 time=5.764 ms 64 bytes from 192.168.1.77: seq=1 ttl=64 time=0.867 ms 64 bytes from 192.168.1.77: seq=2 ttl=64 time=0.858 ms 64 bytes from 192.168.1.77: seq=3 ttl=64 time=0.864 ms 64 bytes from 192.168.1.77: seq=4 ttl=64 time=0.873 ms --- 192.168.1.77 ping statistics --5 packets transmitted, 5 packets received, 0% packet loss round-trip min/avg/max = 0.858/1.845/5.764 ms Ping session completed. 33763 Rev. G https://www.transition.com Page 403 of 496