Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 323
Web Interface, SNMPv3 Accesses Configuration, Parameter, descriptions, Group,
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide 17-2.5 Access This function is used to configure SNMPv3 accesses. The Entry index key are Group Name, Security Model and Security level. To create a new access account, click the Add New Entry button, enter the access information and then click Apply. Max Group Number : 12. Web Interface To configure SNMP Access in the web UI: 1. Click SNMP, SNMPv3, and Accesses. 2. Click Add New Entry. 3. Specify the SNMP Access parameters. 4. Click Apply. 5. To modify or clear the settings click Reset. Figure 17-2.5: SNMPv3 Accesses Configuration Parameter descriptions: Group Name : A string identifying the group name that this entry should belong to. The allowed string length is 1 to 31 characters, and the allowed content is ASCII characters from 33 to 126. Security Model : Indicates the security model that this entry should belong to. Possible security models are: Any: Any security model accepted(v1|v2c|usm). v1: Reserved for SNMPv1. v2c: Reserved for SNMPv2c. usm: User-based Security Model (USM). Security Level : Indicates the security model that this entry should belong to. Possible security models are: NoAuth, NoPriv: No authentication and no privacy. Auth, NoPriv: Authentication and no privacy. Auth, Priv: Authentication and privacy. 33763 Rev. G https://www.transition.com Page 323 of 496